Hydraulic Shoring in Monterey & Santa Cruz CA

Hydraulic Shoring Units in Monterey & Santa Cruz CAWhen carrying out a shoring project, the safety of workers is one of the crucial aspects to give thought to. Hydraulic shoring refers to the use of hydraulic pistons, sometimes combined with steel plates to push against the trench walls to stop them from collapsing. It is one of the safety measures that every contractor must consider whether it’s digging a well or installing a utility hole. At SSSP, our priority is to guarantee superior quality products for your shoring in Santa Cruz County. These products come in different designs. End shores are built to close the end part of the excavation. Vertical shores are perhaps the most popular and are used to support the sides of a trench.

Hydraulic Pressure

By using hydraulic pressure, these shores prevent cave-ins. The designs of these shores allow them to be installed simply from the top of a trench. Besides trench construction, they can also be used during repairs. Hydraulic trench shields are made of aluminum and are very lightweight, and that is why we make it easy to work with rubber backhoes. Contractors usually utilize these shields when doing utility or cable work, repairs, or general underground constructions. Regardless of the type of construction, you can come to us for all your hydraulic shoring needs. Get help with picking suitable products from our professional staff. Contact us today.

RAIL SIZES

2’ RAILS
3-1/2’ RAILS
5’ RAILS
7’ RAILS

PLYWOOD SIZES:

4’ X 8’ PLYWOOD
6’ X 8’ PLYWOOD
8’ X 8’ PLYWOOD
8’ X 10’ PLYWOOD
8’ X 12’ PLYWOOD

CYLINDERS AVAILABLE

17 – 27 (17” to 25”)
22-26 (22” to 34”)
28-46 (28” to 44”)
34-55 (34” to 53”)
43-61 (43” to 61”)
52-88 (52” to 86”)
52-88-24 (72” to 110”)
52-88-42 (94” to 128”)
52-88-56 (108” to 142”)

Get A Quote

  • This field is for validation purposes and should be left unchanged.